How to USE1.Assembling and locating the CNC machine on steady desk well.2.Make sure that your computer has a 25pin parallel port output.3. Place the contral box in a ventilated dry place where there is no dust,no moisture4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.7.Installing a CNC control software and Drive such as the MACH 3 or EMC2on your computer.8.Fllowing our manual or guideline to set uo the software.9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.10.You can enjoy making you dream with using our CNC machine now.packing list: 1X main unit (Frame)1X main unit (working base)2X Fence baffle1X control box1X A axis1X Sinal cable for A axis1X pump1X USB line2X cutter 2*6mm2X cutter 3*6mm10X 4*7mm round head6X 4*10mm black Inner six angle screw with nut8X 5*20mm black Inner six angle screw4X 5*8mm Flat Philip's head screw with nut and gasket8X 6*24mm BALCK FLAT Inner six angle screw12X Aluminium fastener1X 13-15# Wrench1X 14-17# Wrench2X six angle Wrench(3mm)2X six angle Wrench(4mm)1X Teflon tape 2X Fuse (5A)1X Power cable1X Manual2X CD
Trustpilot
3 days ago
4 days ago
