QSFPTEK 10G SFP+ DAC Cable, 0.5m (2ft) Passive Direct Attach Copper Twinax Cable for Cisco SFP-H10GB-CU50CM, Ubiquiti, D-link, Netgear, Mikrotik, Open Switch Devices

Description

10G SFP DAC Twinax Cable for Cisco, Ubiquiti, D-link, Netgear, Mikrotik, Open Switch Devices. Connector Type: SFP to SFP Max Data Rate: 10Gbps Minimum Bend Radius: 23mm Wire AWG: 30AWG Cable Length: 0.5m (1.64ft) Jacket Material: PVC (OFNR) Temperature: 0 to 70C (32 to 158F) Protocols: 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel Installation: A. Installing SFP Modules 1. Remove the protective ESD cap from the connector. 2. Slide the SFP cable end into the slot until it locks into position(There is an audible click when the connector is properly seated.) B. Removing SFP Modules 1. Pull on the SFP latch pull lanyard. 2. Grasp the SFP connector on both sides and remove it from the system. 3. If possible, replace the ESD protective cap or put the SFP into an ESD protected bag. Caution : The latching mechanism locks the SFP connector into place when cables are connected. Do not pull on the cable in an attempt to remove the SFP connector.